2nd Gen R55 Clubman Vinyl Installer Ruined My Sport Stripes!!

Discussion in '2nd Generation: 2007+ R55 through R61' started by HurricaneDave, May 17, 2012.

  1. HurricaneDave

    HurricaneDave New Member

    Apr 9, 2012
    99
    34
    0
    Tellecommunications Engineer
    Ball Ground, GA
    Ratings:
    +34 / 0 / -0
    So I ordered some black sport stripes when I picked up my mini and was told that it would be more affordable for me if I got a local shop to remove my bonnet stripes and install my sport stripes. I did research on several local shops and found one with a good reputation. I took my car in this morning and we discussed how he was going to remove and install. Specifically the rear stripes above the handles. I told him that the wiper assemblies need to be removed in order for the stripes to fit properly and he said it was no problem.

    Part 2: I just went to pick my car up and low and behold the stripes have been cut to fit around the wipers and there are gaps that he wasn't able to close because of this. :mad2:

    His excuse is he couldn't figure out how to get them off so he took it upon himself to hack them to pieces and try and put it all back together without me knowing... and said there was nothing he could do about it because he can't replicate the pieces.

    So my question to you guys is: Is there anywhere I can get my hands on just those 2 pieces? The stripes that go above the door handles?

    Oh yea and needless to say That guy did not get paid and he will have several bad write-ups on the internet for his shop.
     
  2. Xiek

    Xiek Club Coordinator
    Lifetime Supporter

    May 5, 2009
    69
    13
    8
    Service Advisor
    Midland
    Ratings:
    +13 / 0 / -0
    Post pics of the pieces? That may help.
     
  3. HurricaneDave

    HurricaneDave New Member

    Apr 9, 2012
    99
    34
    0
    Tellecommunications Engineer
    Ball Ground, GA
    Ratings:
    +34 / 0 / -0
    So this is not my car but I don't have a picture of the damaged goods. The pieces of vinyl I am looking for are the stripe sections just below the windows (not the beltline lol). The ones that are right behind the wipers and above the handles. I'm not sure I can be more specific unless I painted an arrow :ihih: .

    Hope this gives you guys a better idea of what I am looking for.
     

    Attached Files:

  4. GokartPilot

    GokartPilot Well-Known Member

    Jan 9, 2012
    962
    715
    93
    training specialist
    Maysville, North Carolina USA
    Ratings:
    +780 / 0 / -0
    My suggestion would be take it to a Sign/Graphics Shop. There would be a good chance that they may be able to match up the type of vinyl used and could definitely cut them to the correct dimensions needed.
     
  5. Justa Jim

    Justa Jim Well-Known Member
    Lifetime Supporter

    May 6, 2009
    7,422
    1,685
    113
    Ratings:
    +1,685 / 0 / -0
    #5 Justa Jim, May 18, 2012
    Last edited: May 18, 2012
    Just order some sport stripes from AC, cut and fit them yourself. It really is not hard to do. That is what I did and extended mine down over the front and rear bumpers. :Thumbsup:

    BTW: You might also try Cooper Flags, who is a sponsor here. I have never bought from them, but perhaps others who have can chime in.

    Jim
     
  6. eMINIparts

    eMINIparts Well-Known Member
    Motoring Alliance Sponsor

    Mar 13, 2012
    3,751
    1,087
    113
    MINI Parts Advisor
    Bedford NH
    Ratings:
    +1,090 / 0 / -0
    Not sure if you can flip the cost of the stripes back on the shop that did them ...BUT
    I have the stripes on my site at a discounted price.
    it looks like your clubby is Cooper and you are going with black sport stripes
    here is a link to the sport stripes on my site:
    just offering an option:
    MINI Parts -

    Hope this is helpful!
     
  7. HurricaneDave

    HurricaneDave New Member

    Apr 9, 2012
    99
    34
    0
    Tellecommunications Engineer
    Ball Ground, GA
    Ratings:
    +34 / 0 / -0
    Thanks for all of the suggestions guys! I will look around Mini Mania tomorrow to see if anyone has some and if not I will just order more and do it myself.
     
  8. agranger

    agranger MINI of the Month June 2009
    Supporting Member

    Apr 22, 2009
    2,188
    1,483
    113
    Project Manager
    Charlotte, NC
    Ratings:
    +1,863 / 2 / -0
    I'd bet that a vinyl shop can match the color fairly easily... especially since it won't be RIGHT NEXT to another piece of viny in the same color.

    I remember hearing on a White Roof Radio that Todd had some extra sport stripes that he was gonna sell cheap at the Dragon. Maybe ask him at toddsmods.com
     
  9. HurricaneDave

    HurricaneDave New Member

    Apr 9, 2012
    99
    34
    0
    Tellecommunications Engineer
    Ball Ground, GA
    Ratings:
    +34 / 0 / -0
    So here is a shot of what was done. He used a razor blade to "expand" the wiper blade holes. After they still wouldn't fit he decided to cut and try and seam them so I couldn't tell.

    eMINIparts is there anyway I could just buy those pieces or do you only sell it as a full boot and bonnet kit?
     

    Attached Files:

  10. bravos1

    bravos1 New Member

    May 5, 2012
    89
    22
    0
    San Jose, CA
    Ratings:
    +22 / 0 / -0
    ZOMG.. srsly wtf at that pic?? I would have been pissed too. It looks like crap. Sorry 'bout that Hurricane!
     
  11. HurricaneDave

    HurricaneDave New Member

    Apr 9, 2012
    99
    34
    0
    Tellecommunications Engineer
    Ball Ground, GA
    Ratings:
    +34 / 0 / -0

    Plus I am going to Mini Mania tomorrow morning and he is the only one I have been able to find in Carson City, NV who does vinyl work (with an undeserved good rep). Heated words were exchanged and it is over but what's done is done and now needs to be fixed...
     
  12. Winston

    Winston New Member

    Feb 27, 2012
    15
    0
    0
    Dreamliner Captain
    Kingwood, TX
    Ratings:
    +0 / 0 / -0
    Wow, what a hatchet job. With all the MA help, I'll bet that you'll be able to straighten that out. Post a pic to let us know how it comes out!
     

Share This Page