Most liked posts in thread: Water usage

  1. BlimeyCabrio

    BlimeyCabrio Oscar Goldman of MINIs
    Lifetime Supporter

    May 4, 2009
    3,532
    2,896
    113
    Professional Facilitator and Alignment Consultant
    Holly Springs, NC
    Ratings:
    +2,896 / 0 / -0
    #2 BlimeyCabrio, Jun 6, 2009
    I've used a normal hand pumped garden sprayer many times to rinse. Slower than the nomad but works in a pinch. I use it when we have water restrictions so I can use rainwater from my rain barrel.
     
  2. lotsie

    lotsie Club Coordinator

    May 5, 2009
    3,922
    401
    83
    stagehand/part time detailer
    Right here
    Ratings:
    +401 / 0 / -0
    #3 lotsie, Jun 6, 2009
    Paul, what kind of roof does your rain barrel get water from? I ask this because I worry about grit from asphalt shingles.

    I like the idea of using rainwater for rinsing though. You don't need high pressure to rinse, and a simple line filter would be all that is needed.

    Now if we could get Kenchan from that other site here, he could tells us about how rain washes his daily drivers:rolleyes5::eek:ut::smilewinkgrin:


    Anyone though about using a distiller, no wipe drying:D

    Mark
     
  3. Mishka

    Mishka Badge Whore

    May 4, 2009
    172
    13
    18
    Locomotive Engineer
    Southeast Missouri
    Ratings:
    +13 / 0 / -0
    #4 Mishka, Jun 6, 2009
    Not just grit from shingles-what about the dust/dirt and other stuff that seems to end up on flat surfaces sitting outside. The grit from shingles might be heavy enough to sink in the barrel, but other dust and grit might not.
     
  4. Deviant

    Deviant Banned

    Apr 23, 2009
    578
    2
    0
    Student
    Southern IL
    Ratings:
    +2 / 0 / -0
    #5 Deviant, Jun 6, 2009
    I have a nomad and love it since I live in an apartment and have no outside water access.

    For rain water collection I think something to trap grit in the bottom of the container like the dirtguard would help keep settled dirt from being mixed back up into the water and then an inline filter would make it clean enough for rinsing. I think it's a great idea, especially for when there's water restrictions.

    I've also heard good things about ONR (Optimum No-Rinse) but haven't tried it myself yet, maybe this winter.
     
  5. BlimeyCabrio

    BlimeyCabrio Oscar Goldman of MINIs
    Lifetime Supporter

    May 4, 2009
    3,532
    2,896
    113
    Professional Facilitator and Alignment Consultant
    Holly Springs, NC
    Ratings:
    +2,896 / 0 / -0
    #6 BlimeyCabrio, Jun 7, 2009
    My rain barrel has a tap that draws water from a few inches up off the bottom. I hear you guys' concerns... but in practice, the water is CLEAN. Never seen anything suspended in it. Stuff either floats or sinks. Has a fine screen on top to catch all the big stuff.

    The sprayer I use isn't gonna let anything pass big enough to matter for rinsing. And I use grit guards in the buckets. And, in practice, anything suspended in the rainwater is gonna be WAY less abrasive than the grit on my boot from driving, and the mitt has to wipe that off somehow with the help of the soap for lubricity... if the grit doesn't swirl my car, a little pollen in my water won't, either. IMHO.

    But, yep, you could always filter the water if you were REALLY nuts about it... I hate swirls... but I'm confident rainwater isn't causing them...
     
  6. lotsie

    lotsie Club Coordinator

    May 5, 2009
    3,922
    401
    83
    stagehand/part time detailer
    Right here
    Ratings:
    +401 / 0 / -0
    #7 lotsie, Jun 7, 2009
    I guess your right, if your tap is not right at the bottom of the barrel, and you don't stir up the water, it should be OK.

    As I understand how soap works, it not only lubricates a surface, but it helps lift dust/dirt from the surface by attracting dirt, then suspending it off the surface. Maybe a chemist type could explain this better.

    Mark
     
  7. kensan

    kensan New Member

    Jun 8, 2009
    85
    1
    0
    Ratings:
    +1 / 0 / -0
    #8 kensan, Jun 8, 2009
    as far as carwashing for me and the use of water, i rarely
    use enough water to have run-off go into the street curb.
    my driveway's not that long either...

    the trick is to use the proper nozzles that you can shut-off
    the water when not in use.

    For my dd's, I use the Griot's 9 position spray head with
    the soap dispenser built in. i can skip the shampoo bucket.

    For my hobby cars, I use a normal fireman's hose nozzle.
    i use a one-bucket method...(griot's bucket). the reason
    why i can get away with a one bucket method is... well, my
    cars are garage queens so they're not THAT dirty. :lol:

    For the most part Ive been using the Griot's SprayOn
    CarWash on my hobby cars the last several months. it's
    been great! :cool: now i dont need to worry about water
    left in the nooks and crannies...and it's rather difficult to
    swirl the finish if you use the right technique. :D it has
    super lubricity; so much safer than using just SprayOn
    wax or Hydro while you dry after, say a rain storm... or
    even the morning dew. :)