Most liked posts in thread: We Have 400cc Injectors for the R53 MINI

Nope.... A drilled injector will never spray as good as an injector that was made (From the FACTORY) to flow the same amount of fuel. 99% of the time the spray angles are way off, and just spraying the intake ports down with fuel.

There are plenty of better options than redrills... 440cc 550cc 1000cc... Take your pick pretty much ALL of them are cheaper than your "CORE" fees here! All of them will require a tune, but so do redrills of the same flow rate. Why anybody would want to pay double for a drilled injector over a quality set of injectors, plus be able to keep or sell your OE injectors... Well that just sounds stupid to me.

 

+1.

How does redrllling give the same atomization as stock? Has that actually been tested? There are so many good injectors, available at a reasonable price without a core charge, what exactly is the advantage of these redrilled injectors?

 

What's up Jim? Are you and all those guys all coming over for a beer....:beer

 

Beer n a BBQ!

 

$100 core charge EACH?!

 

TUNE REQUIRED should be mentioned.

 

So its safe to say, since there is a core charge "or you send back your currant OE injectors" that these are just drilled out OE injectors that will provide a higher flow rate?

 

Um sorry, but I would not buy injectors with a "core charge" if my life depended on it.

 

Drill baby drill. This seems like a very poor value prop for the consumer.

 

400's are way to small to make any real power. Plus being re-drills with a $100 core charge......:lol::incazzato::lol:

 

Somebody say BEER?


Mmm... Beer.