Where are you measuring?
Measure at the throttle plate and let us know what you get....
-
Minidave Well-Known MemberLifetime Supporter
-
Crashton Club Coordinator
The opening where the SU mounts to the intake manifold.
Did you know SU stands for Seemingly Useless. Not really, just one of the many Brit car jokes I've heard over the years. :wink: -
UPDATE: It's the HIF38, almost certainly.
I'm pondering switching this this one...
HIF6 Carb Assembly, Rebuilt (SEVR0001) - Seven Mini Parts
MiniMania has one for half the cost, but with no intake manifold, air cleaner or anything else:
http://www.minimania.com/web/Item/FZX1280%2FREB/InvDetail.cfm -
paulsminis New Member
Seven's rebuilt set is a fair deal. And I mentioned on your other thread that I have a used LCB exhaust.....
-
Take the Number from the carb (eg.HS2) & put that number over 8 = 2/8 . Lowest common denominator of that is 1/4. Add this fraction to 1 & bingo you have the internal measurement. HS2 = 1+2/8 = 1 1/4", HS4 =1+4/8 = 1 1/2", HS6 = 1+6/8 = 1 3/4" etc
Similarly the HIF range are quite easy to figure out HIF38 = 38mm. 1" = 25.4mm. Therefore 38/25.4 = 1.49" or 1 1/2".