Most liked posts in thread: When one thing leads to another

Also lay on the ground and look at the bottom of the door and you will see two bolts for the window track.

Make sure they are tight.

 

Is the the auto movement of 1/4” when the door is opened/closed and the one touch down working on the passenger side? If not, try resetting the limits by opening the window and keep holding the window switch for about 5 seconds after it’s fully opened. Then close the window and hold the switch up for about 5 seconds.

After that, the window should fully close and the window auto down and the open/close open door adjustment should be working.

 

WELL DONE---this will save you many problems down the road (and probably a good bit of money also )

 

Well first off I think you should snip off the zip tie..........

Beyond that, don't know

 

I've been wanting to permanently remove that weird gas mask wearing clown face and put something a little more generic up there.

 

What year is your car? I think this has to be done by the dealer as it's in the software code....not a mechanical adjustment. If it were mechanical, it would involve removing the door panel for access to the mechanism.

 

Does that trick work for both 1st and second gen cars? I think she has a second gen based on the pic of the console she's wanting to paint....it has the LEDs.

 

It looks like the overhead console of a face lift ‘05 or ‘06.

Not sure if it works on a 2nd gen, but it’s worked on my ‘05, a couple of Honda’s, and a few Mercedes.