Welp.... A little update....
With the weather being so hot and humid, I didn't do much with my wheel project. However, today was much cooler in the shop, and I was able to put two together. Each wheel has 36 assembly bolts that need to be torqued to 26 ft/lbs each per the Work representative. Yep..... Thats a total of 936 ft/lb's of total torque per rim..... Torquey little devils....:devil:
I still need to seal the barrel joint. And TPMS units are on their way from Aaron @ Outmotoring.... Since the Work wheels have a very unique valve stem, I'll have to do a "work around" when installing the TPMS.
Here you can see where the valve stem enters into the back half of the barrel. The stem makes a 90 degree bend and pokes through the wheel face. Normal TPMS installation won't work. When all the wheels were disasembled I added ID marks to each piece. If you look closely, you can just see my (4) prick marks next to the valve stem hole. That's wheel #4..... It's better to try and keep all the pieces together when re-assembly takes place.
![]()
Page 1 of 4
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
DANGER - DANGER - DANGER
Piksur Intensive
OK.... Another little update
Work wheels don't readily accept TPMS units..... Yes they do make an adapter, but it doesn't hug the barrel very well (not much space inside low profile tires) and can be snagged by the "Tire Guy" and they are "Poke Your Eyes Out Expensive" and weren't in stock at the time I was looking......
Sooooo...... Designed and made my own.... Here's how.....
Developed a design and transferred the pattern to 18 gauge T304 SS.....
Bought 4 SS 3-1/2" hose clamps....
Made em bigger.....
Formed the holders....
Closeup in place.....
Again.....
Ditto....
-
Like x 2
- List
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
-
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
-
Can't wait to see the end result. Those sure are some fine looking wheels.
-
old81 Club CoordinatorLifetime Supporter
- May 4, 2009
- 1,542
- Used to work making computers run fast!
- Ratings:
- +1,731 / 5 / -0
For some reason the images are not coming up on my iMac or my Windows 7 HP using Firefox, latest version.
Hummmm.
Would like to view the WIP progress. -
goaljnky New Member
I wanna see.. no images.
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
Images fixed.... Hopefully....
-
Crashton Club Coordinator
Not only do you fix wheels you fix images.
Thanks Chuck!
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
[ame=http://www.youtube.com/watch?v=WIHbtPWV3ZA]George Thorogood & The Destroyers - The Fixer (30th Anniversary Tour - 2005) - YouTube[/ame]
-
Hecks yes. Those are going to look killer. Subscribed!
Who is PowderCoating them? Sounds like a lot of places are many weeks out on it, except maybe Wheel Medic. I think they are like a week out. Performance PC is like 4 weeks out. -
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
Streetwerkz on Clara next to the fairgrounds is doing it.
The bottleneck is me, not the powder coater. It's been just too dang hot and humid out in the shop. If I'm out there more than and hour working on these babies, I'm drenched.....
I dropped the faces off yesterday after work. So, the old paint is going to be stripped off and prepping for the P/C. -
Crashton Club Coordinator
Looking forward to the final result. I know they are going to be sweet....
-
So is the color a surprise?? :ihih:
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
Faces will be Argento with a gloss clear.
Lips will be my satin aluminum with a gloss clear.
Barrels with be a semi gloss black for brake dust.... -
so, how does one make it satin, or is that a trade secret?
-
Sounds good. Had to search "Argento color" Go ahead and just search "Argento".... no colors come up lol. Wasnt a bad search though!
Page 1 of 4